Samsung J7 Prime Duos Sm G610yds Stock Firmware Ph 04 04 17 Zip
CLICK HERE >> https://byltly.com/2tuGAo
How to Download and Install Samsung J7 Prime Duos SM-G610YDS Stock Firmware PH 04 04 17 Zip
If you own a Samsung Galaxy J7 Prime Duos SM-G610YDS smartphone and want to update it to the latest Android version, you can download and install the stock firmware PH 04 04 17 Zip from SamMobile. This firmware is based on Android 6.0.1 Marshmallow and has the PDA version G610YZTU1AQF2. It is compatible with the Philippines (Open Line) region and can be flashed using Samsung Smart Switch or Odin.
In this article, we will show you how to download and install the Samsung J7 Prime Duos SM-G610YDS stock firmware PH 04 04 17 Zip step by step. Before you proceed, make sure you have backed up your data, charged your battery, and enabled USB debugging on your device. You also need a Windows PC, a USB cable, and the Samsung USB drivers installed on your computer.
Step 1: Download the Samsung J7 Prime Duos SM-G610YDS Stock Firmware PH 04 04 17 Zip
The first step is to download the Samsung J7 Prime Duos SM-G610YDS stock firmware PH 04 04 17 Zip from SamMobile. You can find the download link at [^1^]. You need to register for a free account on SamMobile to access the download page. Once you have downloaded the firmware file, extract it to a folder on your computer. You should see a file with the extension .md5.
Step 2: Download and Install Odin
The next step is to download and install Odin on your computer. Odin is a tool that allows you to flash firmware files to your Samsung device. You can download Odin from [^2^]. Extract the Odin zip file to a folder on your computer and run the Odin.exe file as administrator.
Step 3: Boot Your Device into Download Mode
The third step is to boot your device into download mode. This mode allows you to connect your device to Odin and flash the firmware file. To boot into download mode, follow these steps:
Power off your device completely.
Press and hold the Volume Down, Home, and Power buttons simultaneously for a few seconds.
When you see a warning screen, release all the buttons and press the Volume Up button to confirm.
You should see a screen with a green Android logo and \"Downloading...\" text.
Step 4: Connect Your Device to Your Computer
The fourth step is to connect your device to your computer using a USB cable. Make sure you have installed the Samsung USB drivers on your computer before connecting your device. Once you have connected your device, Odin should recognize it and show an \"Added!\" message in the log box. You should also see a blue or yellow box under the ID:COM section in Odin.
Step 5: Load the Firmware File into Odin
The fifth step is to load the firmware file into Odin. To do this, follow these steps:
Click on the AP button in Odin and browse to the folder where you extracted the firmware file.
Select the .md5 file and click on Open.
Wait for Odin to check the file and show a \"Leave CS...\" message in the log box.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin.
Do not check any other options or change any settings in Odin.
Step 6: Start Flashing the Firmware File
The final step is to start flashing the firmware file to your device. To do this, follow these steps:
Click on the Start button in Odin and wait for the flashing process to begin.
Do not disconnect your device or interrupt the flashing process until it is completed ec8f644aee